Services
Composite Decking in East Yorkshire
Composite decking delivers the warmth of wood without the maintenance — boards made from a wood-fibre and polymer mix hold their colour, resist moisture, and require no sanding, staining, or annual oiling. Evergreen Landscaping installs composite deck systems across East Yorkshire on properly built timber subframes, so the low-maintenance surface sits on a foundation that earns its longevity.
What composite boards actually are
Composite decking boards are extruded from a blend of recycled wood fibre and polymer binders, often with a capped surface layer for UV and stain resistance. The result is a board that looks and feels like wood but doesn't absorb water, doesn't split, and doesn't need annual treatment. For East Yorkshire gardens with shaded areas where timber quickly grows algae, composite is a significant practical upgrade.
Hollow-core vs solid-core composite
Most composite systems use hollow-core boards that are lighter and allow water to drain through the board's chambers. Solid-core boards are denser, quieter underfoot, and better for high-traffic areas. The choice affects the subframe joist spacing too — hollow-core boards typically need closer joist centres to avoid flex. We specify the right board type and frame spacing for your intended use.
Hidden fixing systems and the finished look
Composite decking is almost universally installed with hidden clip fixing systems that grip the board groove and eliminate visible screw heads from the surface. The result is a clean, uniform deck face. End caps are fitted to any exposed board ends to maintain the capped surface all round. Fascia boards cover the subframe perimeter for a neat, finished appearance.
The subframe: where composite projects can go wrong
The boards are only as good as what's beneath them. Composite boards are heavier than timber and flex more if the subframe is underspecified. We build the subframe from pressure-treated timber at the joist centres the composite manufacturer specifies — this is not optional, and it's where shortcuts lead to bouncy, creaking decks. The frame sits on properly positioned posts or bases, not buried in soil.
Steps and the composite range
Composite steps can be built using the same board product for a fully coordinated look, or combined with powder-coated steel stringers for a more contemporary aesthetic. We work with you on the step design so access on and off the deck is safe, comfortable, and visually consistent with the overall garden scheme.
How We Work
- 1
Free site visit and quote
Andy assesses the site, discusses composite board options and colours, and provides a written quote.
- 2
Foundation and subframe
Post bases or pads are set and a pressure-treated timber subframe is built at the correct joist centres for the chosen composite system.
- 3
Board installation
Boards are clipped into position with hidden fixings, cut to length with consistent gaps, and end-capped on exposed ends.
- 4
Fascia and steps
Fascia boards are fitted around the perimeter and steps are constructed and fixed.
- 5
Clean-up and handover
Site is cleared of all packaging and offcuts, and the deck is handed over with maintenance guidance.
Frequently Asked Questions
Does composite decking get slippery in wet conditions?
Quality composite boards with a textured or grooved surface provide good grip in wet weather. We'll discuss the slip-resistance rating of any board we recommend — this matters particularly in shaded, north-facing East Yorkshire gardens.
Can composite decking be painted or stained later if I change my mind on colour?
Capped composite boards are specifically designed NOT to accept paint or stain — the capping layer resists it. Colour choice at the outset is therefore important. We'll show you samples in daylight so you can see how the colour reads in your garden.
Is composite decking suitable for a raised deck with a balustrade?
Yes — many composite systems have matching balustrade components including posts, rails, and infill panels. A coordinated composite balustrade is one of the cleanest finishes available for a raised deck.
How do I clean composite decking?
Most composite boards need only a brush and wash with soapy water to remove surface dirt. Stubborn marks typically respond to a composite-specific cleaner. No oils, no strippers, no sanding needed.
Interested in Composite Decking in East Yorkshire?
Get a free, no-obligation quote — Andy visits every site personally before any price is agreed.